EPS panel machine with wire mesh (vertical),EPS 3D Panel Machine (Vertical Type)
1. The straightening, food and wire cutting are automatically performed in 1 step.
2. The upper frame moves by adjusting the lower rails. During the movement process, welding clamps and rails move as a complete part; If the panel thickness changes, you do not need to adjust your positions one by one, so you can save a lot of time. For the machines of some companies, if you want to change the thickness of the panel, it is very difficult, some even need a work day to change it.
3. There is a device to make holes in the panel before welding. When the cables pass through the panels, they can pass exactly through the holes so that there are fewer welding errors. Therefore, you can also weld rock wool panels, XPS panels or other hard panels in addition to the EPS panels.
4. The copper tape can dissipate heat well. The welding point has greater resistance and admits continuous and stable work.
5. Greater production. Welding speed is faster and there are no spaces between two pieces of panels, so the production of this machine is double that of horizontal welding machines. A machine is equal to two.
6. The welding transformer is fully made of copper, which has greater welding resistance, less problems and is suitable for wider ranges of wire diameters.
7. Two workers are enough to perform the operation. So you can save many job costs.
Prev : Mortar Coating Machine