EPS light steel panel production line
EPS light steel panel production line Introduction
◆The way of mould opening is up and down. The bottom mould is fixed. The upper mould goes up to open the mould, then the labors put into the steel structure manually. Next, the upper mould goes down to close the mould, the labors feed material and thermal molding is done. After the molding is finished, the upper mould goes up, the finished product is ejected by air cylinder, and labors take out the panels manually.
◆The width of length can be adjustable, but it can’t be achieved at the same time, that means, it is either thickness adjustable or length adjustable. But the adjustable machine has a bigger mould size, so the steam consumption is more and machine price is higher.
◆For the window and door making, we use steel plate to make the shapes of windows or doors and put them in the place of doors and windows to block the beads come into these places, after the panels are made, we can take them out.
EPS light steel panel
Prev : EPS panel machine with wire mesh (vertical),EPS 3D Panel Machine (Vertical Type)